Home > Heat Shrink Tubing
Brand: Dymo RhinoMaterial Heat ShrinkPart No S0718300Label Width 12mmColour WhiteAlso known as 18055Adhesive None
512 in stock, immediate despatch
HEAT SHRINK TUBING is specifically designed for wire and cable marking. Once the tubing is printed simply slip it over the end of the (unterminated) cable and use a heat tool to shrink the tubing over the cable. May not be suitable for use on terminated cables (ie. if there is a connector on the end), and the tubing may not be large enough to fit over the connector. In that case consider self-laminating tape, or Vinyl / Nylon.
RECOMMENDED CABLE DIAMETER RANGE:
6mm HST: min. 1.18mm – max. 2.33mm9mm HST: min. 1.73mm – max. 3.73mm12mm HST: min. 2.97mm – max. 5.13mm19mm HST: min. 4.64mm – max. 8.70mm24mm HST: min. 6.00mm – max. 11.00mm
This item is suitable for use in RhinoPRO 1000, 3000, 4200, 5000, 5200, 6000 and ILP-219 labellers. Also suitable for use in 3M PL100, PL200, PL300 and Tyco T107M machines.
Be the first to Write a Review for this item!
Dymo Rhino XTL White Heat Shrink Tube - 12mm, Black Text (p/n: 1868810)£48.49 £40.76
Dymo Rhino Yellow Heat Shrink Tubing - 12mm, Black Text (p/n: 18056)£24.62
Dymo Rhino White Heat Shrink Tubing - 9mm, Black Text (p/n: 18053)£22.89