Home > Heat Shrink Tubing
Brand: Dymo RhinoMaterial Heat ShrinkPart No 1805443Label Width 24mmColour WhiteAdhesive None
No stock, delayed despatch
HEAT SHRINK TUBING is specifically designed for wire and cable marking. Once the tubing is printed simply slip it over the end of the (unterminated) cable and use a heat tool to shrink the tubing over the cable. May not be suitable for use on terminated cables (ie. if there is a connector on the end), and the tubing may not be large enough to fit over the connector. In that case consider self-laminating tape, or Vinyl / Nylon.
6mm HST: min. 1.18mm – max. 2.33mm9mm HST: min. 1.73mm – max. 3.73mm12mm HST: min. 2.97mm – max. 5.13mm19mm HST: min. 4.64mm – max. 8.70mm24mm HST: min. 6.00mm – max. 11.00mm
This item is suitable for use in RhinoPRO 6000 label makers. Also suitable for use in 3M PL300 machines.
Note:24mm tape will ONLY fit the printers specified above.
Be the first to Write a Review for this item!
Dymo Rhino XTL White Heat Shrink Tube - 24mm, Black Text (p/n: 1868811)£35.49 £29.87
Dymo Rhino Yellow Heat Shrink Tubing - 24mm, Black Text (p/n: 1805444)£27.86
Dymo Rhino White Heat Shrink Tubing - 12mm, Black Text (p/n: 18055)£24.62