Home > Heat Shrink Tubing
Brand: Dymo RhinoMaterial Heat ShrinkPart No S0718260Label Width 6mmColour WhiteAlso known as 18051Adhesive None
Availability
293 in stock, immediate despatch
HEAT SHRINK TUBING is specifically designed for wire and cable marking. Once the tubing is printed simply slip it over the end of the (unterminated) cable and use a heat tool to shrink the tubing over the cable. May not be suitable for use on terminated cables (ie. if there is a connector on the end), and the tubing may not be large enough to fit over the connector. In that case consider self-laminating tape, or Vinyl / Nylon.
RECOMMENDED CABLE DIAMETER RANGE:
6mm HST: min. 1.18mm – max. 2.33mm9mm HST: min. 1.73mm – max. 3.73mm12mm HST: min. 2.97mm – max. 5.13mm19mm HST: min. 4.64mm – max. 8.70mm24mm HST: min. 6.00mm – max. 11.00mm
This item is suitable for use in RhinoPRO 3000, 4200, 5000, 5200, 6000 and ILP-219 labelmakers. Also suitable for use in 3M PL200, PL300 and Tyco T107M machines.
Note:6mm tape will NOT fit Rhino 1000 or 3M PL100 printers.
Be the first to Write a Review for this item!
Dymo Rhino XTL White Heat Shrink Tube - 6mm, Black Text (p/n: 1868809)£42.49 £35.58
Dymo Rhino White Heat Shrink Tubing - 12mm, Black Text (p/n: 18055)£24.62
Dymo Rhino Yellow Heat Shrink Tubing - 6mm, Black Text (p/n: 18052)£21.32